The script simply has to be named autorun.bat, and be placed in the root folder of a supported USB Thumb Drive that is then inserted into the PVPlus in question. MER applications off of your PanelView Plus to your USB flash drive, so when you cycle power the terminal and it doesn’t find any applications it is forced to return to the configuration menu. Using some simple command line text commands, you can create a text script that will copy all your.

If you find your PanelView Plus doesn’t display the white square during boot, and simply adding a “goto config” button to the project and re-downloading it is not an option, you may want to use an autorun.bat script. Then on the startup options tab you need to enable the detection of safe mode, and save your setting by pressing ok.Īs you can imagine, this setting often goes unchanged. To enable it, you must first exit the configuration menu, and open the system app in the control panel of the PanelView Plus’s Windows CE operating system. Unfortunately, this feature is not turned on by default. Thankfully, Rockwell heard the feedback and in version 6.1 added back in the option to have the white square or F1 interrupt the boot process. Needless to say, not too many users were enamored with the idea of having to open the electrical enclosure to plug in a keyboard just to change the settings of their HMI. In its place they added a procedure which required plugging a USB keyboard into the back of the terminal. Then came the PanelView Plus 6 with version 6.0 firmware, in which Rockwell removed the white square and F1 functionality. If the story ended here, it would’ve been a happy ending… MER application and go directly into the configuration menu. With this and subsequent firmware versions all the way to 5.1, when you powered on (or reset) your PVPlus, during the boot process you would see a small white square on the bottom left of the screen appear for two seconds.Īnd if on a touch screen you touched the white square, or on a keyboard model you pressed the F1 key while the square was present, the terminal would bypass the default. Thankfully when Rockwell released firmware 3.20.09, they added in an easy way to get into the configuration mode on boot. Firmware 3.20.09 Made things easier, at least up to 5.1… MER file set to autorun, it was forced to return to the configuration menu. This way, when the reassembled PVPlus booted and didn’t find the. MER application files from the card to my computer. When those weren’t available, I would resort to disassembling the unit, pulling out the internal compactflash card, and then moving all the. However, that simple solution required knowing the existing communications settings. When the PanelView Plus first came out (version 3.0,) if a project was set to autorun and had no “goto config” button anywhere in the project, I would typically just download a new project that had a “goto config” button. That said, when a ViewME runtime is downloaded and set to “auto-run,” it becomes the default display in place of the configuration menu.Īnd while most programmers know they should always include a “goto config” button in their project, when they forget just getting back into the configuration menu can be a real chore with certain PanelView Plus versions. The PanelView Plus’s configuration menu is where you setup the terminal, including the clock, network settings, default application, and so on.Īnd when you power up a PanelView Plus for the first time, this is the screen you see displayed on the terminal. Additional termination on the PanelView 800 terminal end of communication cables is not required.So you need to update your PanelView Plus time, date, screensaver, IP address, or other setting but can’t figure out how to access it’s configuration menu? Well don’t feel too bad as Rockwell hasn’t always made this an easy task. This value is compatible with RS422 and RS485 electrical specifications. The RS422/485 port has integrated 120 ohm termination between the R and R- signal pair. RS-422 supports both Full-Duplex and Half-Duplex mode. The RS-422/RS-485 port is an isolated port that supports point-to-point communications. Mounting levers (R-T4T, R-T7T, and R-T10T).Lithium battery for real-time clock (pre-installed).PanelView 800 terminals ship with these items: HMI applications are created using Connected Components Workbench software, and then downloaded to the terminal. PanelView 800 terminals 2711R-T4T are operator interface devices for monitoring and controlling devices attached to a controller. All of them with VICPAS 365 days warranty and support Urgent Worldwide Shipping.

VICPAS supply panelview 800 2711R-T4T Touchscreen Panel, Membrane Keypad, and LCD Display.

Panelview 800 touch screen multitouch